DBLADE is our latest creation! We named it so, because of the design of its button. It looks like a double blade and “weighs” like the devil’s blade.

It is a mechanical mod, 100% handmade!!!

• made of 7075 aluminum (aircraft type)
• 30mm diameter
• Height 88 mm
• 73 g weight
• 21700 battery

It consists of 6 pieces. Which are from top to bottom:

• Its top cap, bearing the DBLADE mark as well as its serial number.
• A double threaded derlin ring
• The aluminum body with the 3 characteristic notches on each side
• The aluminum button in the shape of a double blade (side fire button)
• 1 neodymium magnet 3mm mounted on the bottom of the button
• 1 neodymium magnet 2 mm mounted on the base of the inner tube.

Please note that:

• Because we know how sensitive neodymium magnets are if they hit each other, we placed them carefully protected in 2 screw caps made of derlin. Each of these caps has 2 notches so that they can be screwed and unscrewed respectively with the help of a pair of tongs.
• Two O-rings are placed inside the body tube to ensure on the one hand the correct distance between the button and the tube, and on the other hand to avoid creating scratches when rotating to lock the device.
• Bearing in mind the safety of the user, a circular dig inside the top cap ensures the protection of the positive pole of the battery in case of fire without a vaporizer.

Its special features:

• Double side fire in a way we have never seen before (we would like to believe!!!), pressing the upper notches, but also the middle ones (a little harder)
• Easy locking. Through the third notch on the mod (the one closer to the base), we can rotate the inner part (the double sided fire button) so that it disappears from the two upper notches and can no longer fire!!
• Adjust battery. It is a continuous contact mod which does not leave a gap when it is fully assembled, due to the presence of the two magnets inside the tube. They adjust the small differences that exist in the pins of the vaporizers and the batteries.
• “Eject or not” battery mechanism. The derlin ring at the top of the mod insulates the top cap from the rest of the body. At the same time it gives you two options regarding the removal of the battery, because it has rides on both sides.

1. If when unscrewing the lid you hold the derlin ring on the lid, then the battery will eject.
2. If by unscrewing the lid you keep the derlin ring on the main body, then the battery will remain in the body, it will not eject and to remove it you have to shake it down, as the magnet holds it in place by the negative pole.

• Removal of the magnets (for the squeaky cleaners!!) We have provided an easy way so that the lower magnet, which is difficult to access due to the depth of the tube, can be removed and repositioned. Taking advantage of the properties of magnets, we are following the next steps ( also watch the attached video):

1. Unscrew the mod, remove the battery and the button (in the shape of a double blade).
2. With a pair of tweezers using the special notches of the derlin disk that surrounds the magnet, unscrew it and remove it from the inside of the tube.
3. When cleaning is completed, place the magnet we removed from the bottom of the tube on the magnet located on the bottom of the button with opposite polarity, so that they attract.
4. Place the button with the two attached magnets inside the tube and give a couple of turns so that the lower magnet is partially screwed into the body of the mod. Finish screwing with a pair of tweezers, tightening it better.
5. Finally, invert the magnet at the base of the button so that the two magnets are repelled.

* Note that the 3mm magnet is screwed onto the button and the 2mm is placed inside the tube.

Cleaning tips

For the proper maintenance of your mechanical mod DBlade, we suggest the following: You can clean it as often as you want with the use of a mild detergent, such as dish soap. A soft toothbrush would be ideal to reach points surfaces, points of contact, joints and coils. DO NOT USE erasers and Cleaning Wires, or polishing creams! DBlade does not present arching phenomena due to the construction material and the configuration of the surfaces at the contact points.

The post Fire button spare part for Dblade mod appeared first on Caveman Mods.

The post Billet Box Hybrid Drip Tip #3 appeared first on Caveman Mods.

The post Billet Box Hybrid Drip Tip #2 appeared first on Caveman Mods.

Spring Fire Full Edition (tube + SBS) is our latest creation! We named it so, because of the design of its button. It looks like a spring which is actually a unique fire button!!

It is a “2-in-1” tube and SBS mechanical mod. It transformes  from a tube mech mod into an SBS mod (and vice versa) in a matter of seconds!!! Check out the amazing transformation here!!!

It consists of 8 pieces. Which are :

• 2 extentions (short & tall): These are actually the parts where your atomiser is screwed on (using the top cap of the 24mm Spring Fire tube). We provide both a short and a tall one, so as to combine them with your different height atomisers  as you please!
• 1 autoadjust mechanism: it goes inside either extension of your kit and is regulated by the 510 pin height of the atomiser you have chosen to use. Now any atomiser you own will fit perfectly!
• 1 base plate: It is the base where the extension of your choice is screwed on (included in this product), as well as the 24mm Spring Fire tube ( included in this product)
• 1 top tube cap, bearing the “Spring Fire” mark as well as its serial number*
• 1 derlin battery sleeve (which is used for the adjusting of the battery)*
• 1 Aluminium pin (it is the constant contant point to your battery)*
• 1 main tube body on which the  spring fire button is incorporated*
• spare parts (2 x base screws, 1 x acrylic insulating film, 1 x insulating round sticker)

*parts constructing the Spring fire 24mm tube mech mod

Please note that:

• Its engineering is so cleverly designed so that is really easy to assembly , disassembly and adjust without the use of tools.
• The large surface of the threads that hold the derlin battery sleeve inside the tube  ensure the elimination of thread damage.
• Different thread pitches on the topcap and the battery’s adjust sleeve (derlin) will not deregulate your batterys adjustment while screwing the top cap.
• Bearing in mind the safety of the user, a circular dig inside the top cap ensures the protection of the positive pole of the battery in case of fire without a vaporizer.

Its special features:

• Spring fire button in a way we have never seen before!!!! Due to the fact that the spring button is incorporated to the tubes body, it offers very high performance giving  (1) the lowest voltage drop you have ever seen as a bottom button mech mod                                                                                                      (2)a smooth highly efficient fire button in its SBS form
• Easy locking.  One single rotation either of the top cap (in its tube form) or of the tubes body (in its sbs form) is enough so as to “lock” your mech mod. The battery is no longer in contact with your atomiser and the constant contact pin.
• Effortless Adjust battery. Without the use of any tool, using only your hand and rotating the battery sleeve, you can adjust the battery. Short threads ensure accuracy presicion.
• Versatile character. This is the product that will allow you to have two different type of mods in one!!!!!!!!  Both a 24mm tube mech mod and an SBS.  You can transform your Spring Fire 24mm tube  into an innovative SBS (and vice versa) in no time!!
• Endurance. All parts of the product are made of solid  billet material (aluminium 7075) for maximum mechanical strength.
• Auto – Adjust mechanism. It is very important to point out that the presence of this mechanism in the SBS form only ( !!!) will allow you to use non hybrid safe atomisers. The mechanism can be unscrewed  into its parts so as to  proceed to any cleaning work, without the use of any tool.
• Elegant design and impeccable ceramic CERAKOTE coating.

The post Spring Fire – SBS Full Edition appeared first on Caveman Mods.

Spring Fire kit is the product that transforms your Spring Fire mech mod into SBS!!!!!!!!

This product does not include the Spring fire tube 24mm. You need to also purchase the 24mm tube in order for it to work.

You can decide when it is the correct time for you to turn your tube into an SBS!!!!We wanted Spring Fire 24mm tube owners to have the choice of purchasing the kit whenever they felt like it!!!!!

It consists of 4 pieces. Which are:

• 2 extentions (short & tall): These are actually the parts where your atomiser is screwed on (using the top cap of the 24mm Spring Fire tube). We provide both a short and a tall one, so as to combine them with your different height atomisers  as you please!
• 1 autoadjust mechanism: it goes inside either extension of your kit and regulates the 510 pin height of the atomiser you have chosen to use. Now any atomiser you own will fit perfectly!
• 1 base plate: It is the base where the extension of your choice is screwed on (included in this product), as well as the 24mm Spring Fire tube (not included in this product)

Its special features:

• Versatile character. This is the kit that will allow you to have two different type of mods in one!!!!!!!!       Both a 24mm mech mod and an SBS. With this kit you can transform your Spring Fire 24mm tube (not included in this code) into an innovative SBS (and vice versa) in no time!!
• Endurance. All parts of the product are made of solid  billet material (aluminium 7075) for maximum mechanical strength.
• Auto – Adjust mechanism. It is very important to point out that the presence of this mechanism in the SBS will allow you to use non hybrid safe atomisers. The mechanism can be unscrewed  into its two parts so as to  proceed to any cleaning work, without the use of any tool.
• Elegant design and impeccable ceramic CERAKOTE coating.

Cleaning tips

For the proper maintenance of your Spring Fire mechanical mod , we suggest the following: You can clean it as often as you want with the use of a mild detergent, such as dish soap. A soft toothbrush would be ideal to reach points surfaces, points of contact, joints and coils. DO NOT USE erasers and Cleaning Wires, or polishing creams! Spring Fire does not present arching phenomena due to the construction material and the configuration of the surfaces at the contact points.

The post Spring Fire – SBS Kit appeared first on Caveman Mods.

Spring Fire 24mm mech mod (tube) is our latest creation! We named it so, because of the design of its button. It looks like a spring which is actually a unique fire button!!

It is a mechanical mod, 100% handmade!!!

• Made of 7075 aluminum (aircraft type)
• 24mm diameter
• Height 77 mm
• 25 g weight
• 18650 battery

It consists of 4 pieces. Which are from top to bottom:

• Its top cap, bearing the “Spring Fire” mark as well as its serial number.
• A derlin battery sleeve (which is used for the adjusting of the battery)
• Aluminium pin (it is the constant contant point to your battery)
• The main body on which the bottom fire button is incorporated

Please note that:

• Its engineering is so cleverly designed so that is really easy to assembly , disassembly and adjust without the use of tools.
• The large surface of the threads that hold the derlin battery sleeve inside the tube  ensure the elimination of thread damage.
• Different thread pitches on the topcap and the battery’s adjust sleeve (derlin) will not deregulate your batterys adjustment while screwing the top cap.
• Bearing in mind the safety of the user, a circular dig inside the top cap ensures the protection of the positive pole of the battery in case of fire without a vaporizer.

Its special features:

• Bottom spring fire button in a way we have never seen before!!!! Due to the fact that the spring button is incorporated to the tubes body, it offers very high performance giving the lowest voltage drop you have ever seen in a bottom button mech mod.
• Easy locking.  One single rotation of the top cap is enough so as to “lock” your mech mod. The battery is no longer in contact with your atomiser and the constant contact pin.
• Effortless Adjust battery. Without the use of any tool, using only your hand and rotating the battery sleeve, you can adjust the battery. Short threads ensure accuracy presicion.

Cleaning tips

For the proper maintenance of your Spring Fire mechanical mod , we suggest the following: You can clean it as often as you want with the use of a mild detergent, such as dish soap. A soft toothbrush would be ideal to reach points surfaces, points of contact, joints and coils. DO NOT USE erasers and Cleaning Wires, or polishing creams! Spring Fire does not present arching phenomena due to the construction material and the configuration of the surfaces at the contact points.

The post Spring Fire 24mm (tube) appeared first on Caveman Mods.

DBLADE is our latest creation! We named it so, because of the design of its button. It looks like a double blade and “weighs” like the devil’s blade.

It is a mechanical mod, 100% handmade!!!

• made of 7075 aluminum (aircraft type)
• 30mm diameter
• Height 88 mm
• 73 g weight
• 21700 battery

It consists of 6 pieces. Which are from top to bottom:

• Its top cap, bearing the DBLADE mark as well as its serial number.
• A double threaded derlin ring
• The aluminum body with the 3 characteristic notches on each side
• The aluminum button in the shape of a double blade (side fire button)
• 1 neodymium magnet 3mm mounted on the bottom of the button
• 1 neodymium magnet 2 mm mounted on the base of the inner tube.

Please note that:

• Because we know how sensitive neodymium magnets are if they hit each other, we placed them carefully protected in 2 screw caps made of derlin. Each of these caps has 2 notches so that they can be screwed and unscrewed respectively with the help of a pair of tongs.
• Two O-rings are placed inside the body tube to ensure on the one hand the correct distance between the button and the tube, and on the other hand to avoid creating scratches when rotating to lock the device.
• Bearing in mind the safety of the user, a circular dig inside the top cap ensures the protection of the positive pole of the battery in case of fire without a vaporizer.

Its special features:

• Double side fire in a way we have never seen before (we would like to believe!!!), pressing the upper notches, but also the middle ones (a little harder)
• Easy locking. Through the third notch on the mod (the one closer to the base), we can rotate the inner part (the double sided fire button) so that it disappears from the two upper notches and can no longer fire!!
• Adjust battery. It is a continuous contact mod which does not leave a gap when it is fully assembled, due to the presence of the two magnets inside the tube. They adjust the small differences that exist in the pins of the vaporizers and the batteries.
• “Eject or not” battery mechanism. The derlin ring at the top of the mod insulates the top cap from the rest of the body. At the same time it gives you two options regarding the removal of the battery, because it has rides on both sides.

1. If when unscrewing the lid you hold the derlin ring on the lid, then the battery will eject.
2. If by unscrewing the lid you keep the derlin ring on the main body, then the battery will remain in the body, it will not eject and to remove it you have to shake it down, as the magnet holds it in place by the negative pole.

• Removal of the magnets (for the squeaky cleaners!!) We have provided an easy way so that the lower magnet, which is difficult to access due to the depth of the tube, can be removed and repositioned. Taking advantage of the properties of magnets, we are following the next steps ( also watch the attached video):

1. Unscrew the mod, remove the battery and the button (in the shape of a double blade).
2. With a pair of tweezers using the special notches of the derlin disk that surrounds the magnet, unscrew it and remove it from the inside of the tube.
3. When cleaning is completed, place the magnet we removed from the bottom of the tube on the magnet located on the bottom of the button with opposite polarity, so that they attract.
4. Place the button with the two attached magnets inside the tube and give a couple of turns so that the lower magnet is partially screwed into the body of the mod. Finish screwing with a pair of tweezers, tightening it better.
5. Finally, invert the magnet at the base of the button so that the two magnets are repelled.

* Note that the 3mm magnet is screwed onto the button and the 2mm is placed inside the tube.

Cleaning tips

For the proper maintenance of your mechanical mod DBlade, we suggest the following: You can clean it as often as you want with the use of a mild detergent, such as dish soap. A soft toothbrush would be ideal to reach points surfaces, points of contact, joints and coils. DO NOT USE erasers and Cleaning Wires, or polishing creams! DBlade does not present arching phenomena due to the construction material and the configuration of the surfaces at the contact points.

The post Dblade mod appeared first on Caveman Mods.

The post Stack Piece appeared first on Caveman Mods.

A … concept mod !!!
Its name? The initials from the phrase Make Your Mech.
It actually means that in this product you have the ability to personalize the mod based on your taste, choosing any crazy combination you like.

An endless combination of designs and colors in a diameter of 30mm.

A side button mechanical mod, which in one of its 3 designs, gives us for the first time something new in the vaping technology! The “Triple”mod is the first mod with a triple fire button !!!

MYM consists of ONLY 3 parts! The simplest design that could ever exist. The main body, the insulating battery tube and the negative pole cap.

A 21700 battery is what will give life to the mod! Moreover the permanent contact button will protect it from arcing.
Made of aircraft type 7075 aluminum, one of the most durable aluminum alloys, in combination with its design, really classifies it in the “feather” category, since its weight barely reaches 50gr.

Cleaning tips

For the proper maintenance of your mechanical mod MYM, we suggest the following: You can clean it as often as you want with the use of a mild detergent, such as dish soap. A soft toothbrush would be ideal to reach points surfaces, points of contact, joints and coils. DO NOT USE erasers and Cleaning Wires, or polishing creams! M.Y.M does not present arching phenomena due to the construction material and the configuration of the surfaces at the contact points.

The post Flat MYM mech mod appeared first on Caveman Mods.

A … concept mod !!!
Its name? The initials from the phrase Make Your Mech.
It actually means that in this product you have the ability to personalize the mod based on your taste, choosing any crazy combination you like.

An endless combination of designs and colors in a diameter of 30mm.

A side button mechanical mod, which in one of its 3 designs, gives us for the first time something new in the vaping technology! The “Triple”mod is the first mod with a triple fire button !!!

MYM consists of ONLY 3 parts! The simplest design that could ever exist. The main body, the insulating battery tube and the negative pole cap.

A 21700 battery is what will give life to the mod! Moreover the permanent contact button will protect it from arcing.
Made of aircraft type 7075 aluminum, one of the most durable aluminum alloys, in combination with its design, really classifies it in the “feather” category, since its weight barely reaches 50gr.

Cleaning tips

For the proper maintenance of your mechanical mod MYM, we suggest the following: You can clean it as often as you want with the use of a mild detergent, such as dish soap. A soft toothbrush would be ideal to reach points surfaces, points of contact, joints and coils. DO NOT USE erasers and Cleaning Wires, or polishing creams! M.Y.M does not present arching phenomena due to the construction material and the configuration of the surfaces at the contact points.

The post Helmet MYM mech mod appeared first on Caveman Mods.